Najnowsza wersja oprogramowania fabrycznego została opublikowana 18 stycznia 2018 (rev. G). W tej wersji oprogramowania wyeliminowano potencjalny błąd w komunikacji CAN, który mógł znacznie wpływać na jakość cięcia. W nowej wersji oprogramowania zawarliśmy także inne usprawnienia. W warunkach roboczych spotkaliśmy się z kilkoma przypadkami poważnego pogorszenia jakości cięcia w procesie […]

We recently release a new firmware revision, January 18-2018 (to rev. G). This firmware revision eliminates a potential CAN communication issue which could have significantly impacted cut quality. The new firmware revision includes several other improvements, as well. In the field we experienced few instances of a severe deterioration in […]

To simplify programming robotic motion when cutting with an XPR300TM system, we are releasing a newly developed robotic teaching torch. This torch is designed to fit into an XPR300 torch receptacle and aligns a laser diode on the same tool center point as exists on a standard XPR300 torch assembly. […]

To improve the XPR300’s ability to detect and react to impending ramp down errors, thereby extending mild steel cutting consumable life, we sped up the action of the plasma gas control valve located in the receptacle. We found, however, that in some instances limited to the 130 amp oxygen process, […]